Five-Die-Five-Blow Cold Heading Machine

Feeding System

The feeding system adopts the air cylinder crimping system, which can adjust the air pressure to benefit different materials and wire diameters.
The feeding claws can be raised to reduce loss during the return trip.
There is no time limit switch when feeding, so there will be no feeding failure.
When the feeding short is abnormal, it can be automatically raised to stop feeding.
The feeding wheel is equipped with an anti-reverse device to prevent the wire from retreating.

Cutting System

Cutting system, the cutter plate adopts a full-circle type, the shearing surface is neat and perpendicular to the material diameter, the cutter slide is aligned with the center of the cutter bar, the cutting force point is perfect and reliable, and the stability of the end of the cutting material is increased.
The position of the cutter plate can be adjusted without shims, and the adjustment method is simple and reliable.

Rear Exit System

The rear exit system adopts the rocker arm type exit system, and the stroke of the exit cam is adjustable.
The last die can be replaced with a hexagonal head cam.
The cam plate is precisely processed by the C.N.C.

Front Exit System

The front exit system, the die exit system, and the exit cam plate are precisely designed by the computer, which can synchronize the movement of the front exit rod with the retreat of the main slide so that the workpiece stays perfectly in the main mold and avoids being punched It is impossible to carry out the next process when taking out.
The four sets of dies in this system can all be used for the outgoing action, and the main module can be adjusted independently.

Grip System

After high-frequency heat treatment, the hardness is guaranteed: HRC58°~61°, the clamping seat When the slide plate is conveyed, there is no gap movement, which reduces the load of the machine during operation and increases the service life.
The surface of the slide plate and the slide rail of the seat are subjected to high-frequency heat treatment and then processed by precision molding and grinding.
The slide rail of the seat can be adjusted to precision Cooperate to make the clamping workpiece stable and reliable and increase its life during operation.
The method of adjusting the center position of the clamping arm is simple and reliable.
The clamping seat is turned up using an electric geared motor (above HH-84).

Technical Parameters

Model: TX-5.5(7B)
Blank Dia.Range: 1.5-7 MM
Blank Length Range: 65MM
Max.Cut-off Dia.: 7MM
Max. Cut-off Length: 83MM
Sutic Die Injection Length C: 70MM
Dynamic Die Ejection Length: 15MM
Main Die Size: Φ46*100
Punches Die Size: Φ31*80-Φ36*80
Cut-off Die Size: Φ22*50
Main Motor: 11KW
Capacity: 60-150PCS/MIN
Weight: 5800KG